Shambaugh, B.R., Papavassiliou, D.V., and R.L. Shambaugh, “Modifying Air Fields to Improve Melt Blowing,” Ind. Eng.  Chem. Res., 51, 3472-3483, 2012; DOI: 10.1021/ie202501u

Shambaugh, B.R., Papavassiliou, D.V., and R.L. Shambaugh, “Next-Generation Modeling of Melt Blowing,” Ind. Eng. Chem. Res.,  50(21), 12233-12245, 2011; DOI: 10.1021/ie200836a

Marla, V.T., Shambaugh, R.L., and D.V. Papavassiliou, “On-line measurement of fiber diameter and temperature in the melt spinning and melt blowing processes,” Ind. Eng. Chem. Res. 48(18), 8736-8744, 2009.

Marla, V.T., Shambaugh, R.L., and D.V. Papavassiliou, “Unsteady state heat transfer from polymer filaments to air in normal and parallel flow,” Ind. Eng. Chem. Res., 48(8), 4119-4126, 2009.

Krutka, H.M., Shambaugh, R.L., and D.V. Papavassiliou, “Effects of the polymer fiber on the flow field from a slot melt blowing die,” Ind. Eng. Chem. Res., 47(3), 935-945, 2008.

Krutka, H.M., Shambaugh, R.L., and D.V. Papavassiliou, “Effects of the polymer fiber on the flow field from an annular melt blowing die,” Ind. Eng. Chem. Res., 46(2), 655-666, 2007.

Marla, V.T., Shambaugh, R.L., and D.V. Papavassiliou, “Use of an infrared camera for accurate determination of the temperature of polymer filaments,” Ind. Eng. Chem. Res., 46(1), 336-344, 2007.

Krutka, H.M., Shambaugh, R.L., and D.V. Papavassiliou, “Analysis of the temperature field from multiple jets in the Schwarz melt blowing die using computational fluid dynamics,” Ind. Eng. Chem. Res., 45(14), 5098-5109, 2006.

Marla, V.T., Shambaugh, R.L., and D.V. Papavassiliou, “Using swirl dies to spin solid and hollow fibers,” Ind. Eng Chem. Res.,  45(7), 2331-2340, 2006.

Marla, V., Shambaugh, R.L., and D.V. Papavassiliou, “Modeling the melt blowing of hollow fibers,” Ind. Eng. Chem. Res.,  45(1), 407-415, 2006.

Krutka, H.M., Shambaugh, R.L., and D.V. Papavassiliou, “Analysis of multiple jets in the Schwarz melt blowing die using computational fluid dynamics,” Ind. Eng. Chem. Res. , 44(23), 8922-8932, 2005.

Moore, E.M., Shambaugh, R.L., and D.V. Papavassiliou, “Analysis of Isothermal Annular Jets: Comparison of CFD and Experimental Data,” J. Appl. Polym. Sci., 94(3), 909-922, 2004.

Krutka, H.M., Shambaugh, R.L., and D.V. Papavassiliou, “Effects of temperature and geometry on the flow field of the melt blowing process,” Ind. Eng. Chem. Res., 43(15), 4199-4210, 2004.

Krutka, H.M., Shambaugh, R.L., and D.V. Papavassiliou, “Effects of die geometry on the flow field of the melt blowing process,” Ind. Eng. Chem. Res., 42(22), 5541-5553,2003.

Krutka, H.M., Shambaugh, R.L., and D.V. Papavassiliou, “Analysis of a melt blowing die: comparison of CFD and experiments,” Ind. Eng. Chem. Res., 41(20), 5125-5138,2002.